Evopreg EPC component prepregs are developed using our in-house formulated epoxy resin systems. They are designed for a range of cure temperatures with high performance, ease of lay-up and excellent surface finish.
We can supply Evopreg EPC epoxy component prepregs with a wide range of reinforcements and fabric constructions including carbon, glass, ampliTex™ flax, aramid and basalt. They can be consolidated by vacuum bag/oven, autoclave or press moulding and are designed for a range of applications including automotive, motorsport, sporting goods and general industrial. Resin content, resin bias and tack levels can all be tailored to your requirements.
Based on a toughened epoxy resin system Evopreg EPC200 component prepregs are primarily designed for low-temperature, out-of-autoclave processing. Their flexible cure profile also makes them ideally suited to rapid processing at higher temperatures.
Evopreg EPC300 component prepregs are based on a medium temperature curing, toughened epoxy resin system. They are ideal for high performance, lightweight structural components and are engineered for rapid, easy lay-up with excellent surface finish.
|Recommended cure||65°C, 12 hours
– OR –
120°C, 30 mins
|120°C, 1 hour|
|Out-life at room temperature||up to 21 days||up to 30 days|
|Good tack and drape||✓||✓|
|Excellent surface finish||✓||✓|
|Available on a wide range of reinforcement fabrics||Carbon fibre prepreg, glass fibre prepreg, ampliTex™ flax prepreg, aramid prepreg and basalt prepreg|
Download our datasheets for full technical specifications and processing methods.
Evopreg EPC epoxy component prepregs can be processed using standard techniques including vacuum bagging, autoclave and press moulding.
Evopreg EPC epoxy components are suitable for a wide range of markets and applications including automotive, sporting goods, mass transport, motor-sport, marine and consumer products.
*Evopreg is a registered trademark of Composites Evolution Limited
Complete the form, or use the contact details and one of our sales team will be in touch.
Share this page